A PCI Bridge for Getting 4:2:2 Footage into an NLE

Whether you are "future-proofing" a production, or simply taking
advantage of that extra resolution HD provides your show, shooting in
high-def can provide a lot of benefits. But how do you cost-effectively
get your footage into your NLE system? That’s where Blackmagic Design
DeckLink HD Pro comes in. At $1,495, DeckLink HD Pro seemed like a good
solution for one of our recent HD projects, so we purchased a unit.
DeckLink HD Pro is a single PCI card with just three main ports on the
outside: two SDI and one nine-pin multi-port. The DeckLink HD Pro 4:2:2
is not quite the top of the line, offering "only" 4:2:2 resolution and
a single SDI input and output. But, we find most of our productions are
still firmly rooted in the 4:2:2 world, so this card fit our needs
nicely. The cable that attaches to the nine-pin interface has four BNC
connectors (component video and a reference video in), two female RCA
connectors (SP/DIF audio in and out) and an RS-422 female connector.
All inputs and outputs work simultaneously, so we have both an SDI
output to an HD video monitor and a component output hooked up for SD
applications.
How It Works
The DeckLink HD Pro worked like a charm in both our Windows and Mac
systems. An added benefit with DeckLink cards is the lossless 8-bit and
10-bit Blackmagic Design codec set. We were able to seamlessly move
files back and forth between Mac and PC systems, which dramatically
reduced our post time. The only issue we had with the DeckLink HD Pro
card was occasional communication problems between some Sony decks and
the RS-422 controller. But after several months of use, our DeckLink HD
Pro card has become an invaluable part of our studio operations.